Sare mode tv led

• 

https://www.blogger.com/blog/post/edit/preview/7825179860796670713/6389554565273205240

COVER KORBAN JANJI (GUYON WATON )

PANASONIC PLASMA TVs – COMMON FAULTS AND REMEDIES

TH42PX600 - TH42PX60

Symptom > Shuts down with power LED 10 blinks.

Cause > Missing 395Vdc output due to shorted Q412 & Q413 and open PR401.
Remedy > Replace Q412, Q413, PR401 & check/replace Q408 and Q409.  Note: Always confirm condition of Q408 & Q409, in some cases could be shorted.

Symptom > Picture disappears after few minutes but sound is OK.

Cause > Low Ldo_5V supply to IC9800 (DC to DC Converter) due to leaky D9801.
Remedy > Replace D9801 on the D board.

Symptom: AC cord plugged in, relay clicks then TV shuts down with power LED 10 blinks
Cause: No Vin supply to IC520 (power control IC) due to open R712 & shorted C527

Remedy > Replace R712 & C527

Symptom > Vibration noise from left or right speaker.
Cause > Speaker box is making direct contact with cabinet parts.
Remedy . Installing mounting screw in the center of speaker box prevents from touching the cabinet parts and minimizes the risk of vibration noise.
Procedure >> Install screw, part number THEL049 to both speaker boxes as in attached picture.

Symptom > Unit shuts down with power LED 10 blinks
Cause > Shorted Q409 & open PR401
Remedy > Replace Q409 & PR401

PANASONIC TH65PZ850U, TH58PZ850U, TH50PZ850U, TH46PZ850U, TH58PZ800U, TH50PZ800U, TH46PZ800U, TH42PZ800U, TH50PZ80U, TH46PZ80U, TH42PZ80U, TH50PX80U, TH42PX80U, TH50PZ85U, TH46PZ85U, TH42PZ85U

Symptom > Once AC power cord is plugged in, unit will turn on by itself. Depends on factory settings, unit will either display Video, Component or Tuner icon. After few seconds, screen will change to service mode automatically. NOTE: Since unit is in service mode, only buttons 1, 2, 3 or 4 on remote are working (rest of buttons are nonfunctional). 

Cause > 'A'-Board Part Number: TNPH0716XXX, TNPH0721XXX & TNPH0731XXX series.
All new 'A' boards supplied from factory needs to be initialized.
Remedy
1 Perform HARD RESET of Plasma TV unit by pressing & holding VOL DOWN (-) on unit and MENUbutton on remote at the same time for about 3 seconds.
2 After hard reset, please confirm if Plasma TV powers ON in user mode and check overall functionality.

VESTEL 17MB25 TFT LCD TV – SERVICE MODE – ADJUSTMENT DETAILS - URC Set-up Codes

17MB18 - Vestel LCD TV PWB - Service mode_Adjustments

Cost of this main board ~ $60.

Universal remote control set-up codes for Vestel kits: 0044 0049 0101 0107 0125 0152 0166 0379 0654

SERVICE MENU SETTINGS
In order to reach service menu, First Press “MENU” Then press the remote control code, which is “4725”.

In DTV mode, first press “MENU” and select “TV SETUP”.  Then, press “4725”.

Video Setup
Panel Info <............>
32_LC_SAC1
Blue Background <.....>
If “Menu” selected, “Blue Background” item is seen in “Feature” menu.  If “Yes” selected, “Blue Background” is on and not seen in “Feature” menu.
Film Mode <.....>. If “Yes” selected, “Film Mode” feature is active.
Dynamic Contrast <.....>. If “Yes” selected, “Dynamic Contrast” feature is active.
Game Mode <...........>. If “Yes” selected, “Game Mode” feature is active
SRGB For PC <...........>. If “Yes” selected, PCs can use SRGB option.
Dynamic Noise Reduction<...........>. If “Yes” selected, “Dynamic Noise Reduction” feature is active
WSS Option<...........>. If “Yes” selected, WSS Option can be used.

Audio Setup
BG <.....>
Europe New Zeeland Australia
No
DK <.....>
I <.....>
L <.....>
Equalizer <.....>. If “Yes” selected, “Equalizer” item is seen in “Sound” menu.
Headphone <.....>. If “Yes” selected, “Headphone” item is seen in “Sound” menu.
Power On/Off Melody <.....>. If “Yes” selected, when power on/off conditions, the power on/off melody can be heard.
Dynamic Bass <.....>Value between 0 to 12.  Effect <.....> Value between 0 to 7

Audio Delay ,offset <.....> Value between 0 to 190
Audio Setup Cont...2
Carrier mute <.......> Value between 0 to 28
Headphone Sound Select <.......>
Always Active Select
Always Inactive Select
Menu
Always Main Menu
Always PIP/PAP Window
Sound Mode Detect Time <.......> Value between 0 to 255
Noise Reduction Threshold <.......> Value between 0 to 255
Noise Reduction Time <.......> Value between 0 to 15
AVL Attack Time <.......> Value between 0 to 255
AVL Release Time <.......> Value between 0 to 255.

Prescales ( AVL On)
FM Prescale<.......> Value between 0 to 255
AM Prescale <.......> Value between 0 to 255
NICAM Prescale <.......> Value between 0 to 255
SCART Prescale <.......> Value between 0 to 255
FAV Prescale <.......> Value between 0 to 255
DTV Prescale <.......> Value between 0 to 255
HDMI Prescale <.......> Value between 0 to 255
YPbPr/PC Prescale <.......> Value between 0 to 255
An. USB Prescale <.......> Value between 0 to 255
Dig. USB Prescale <.......> Value between 0 to 255

Prescales ( AVL Off)
FM Prescale<.......> Value between 0 to 255
AM Prescale <.......> Value between 0 to 255
NICAM Prescale <.......> Value between 0 to 255
SCART Prescale <.......> Value between 0 to 255
FAV Prescale <.......> Value between 0 to 255
DTV Prescale <.......> Value between 0 to 255
HDMI Prescale <.......> Value between 0 to 255
YPbPr/PC Prescale <.......> Value between 0 to 255

An. USB Prescale <.......> Value between 0 to 255
Dig. USB Prescale <.......> Value between 0 to 255

Clipping Levels ( AVL On)
FM Clipping <.......> Value between 0 to 255
AM Clipping <.......> Value between 0 to 255
NICAM Clipping <.......> Value between 0 to 255
SCART Clipping <.......> Value between 0 to 255
FAV Clipping <.......> Value between 0 to 255
DTV Clipping <.......> Value between 0 to 255
HDMI Clipping <.......> Value between 0 to 255
YPbPr/PC Clipping <.......> Value between 0 to 255
An. USB Clipping <.......> Value between 0 to 255
Dig. USB Clipping <.......> Value between 0 to 255

Clipping Levels ( AVL Off)
FM Clipping <.......> Value between 0 to 255
AM Clipping <.......> Value between 0 to 255
NICAM Clipping <.......> Value between 0 to 255
SCART Clipping <.......> Value between 0 to 255
FAV Clipping <.......> Value between 0 to 255
DTV Clipping <.......> Value between 0 to 255
HDMI Clipping <.......> Value between 0 to 255
YPbPr/PC Clipping <.......> Value between 0 to 255
An. USB Clipping <.......> Value between 0 to 255
Dig. USB Clipping <.......> Value between 0 to 255

Service Scan/Tuning Setup
First Search for L/L’ <.......>
ATS Delay Time (ms) <.......> Value between 0 to +200
Main Tuner Setup
Tuner Type
LC_TDTC_GXX1D
Thomson DTT7543X
Philips TD1318AF-3
Samsung DTOs403LH172A
Generic ( Analog Only)
Control Byte <.......> Value between 0 to +255
BSW1 <.......> Value between 0 to +255
BSW2 <.......> Value between 0 to +255
BSW3 <.......> Value between 0 to +255
Low-Mid – Low Byte <.......>
Low-Mid – High Byte <.......>
Mid-High – Low Byte <.......>
Mid-High – High Byte <.......>

S Band TOP <.......>
VIF TOP <.......> Value between 0 to +15
VIF TOP SECAM <.......> Value between 0 to +15
VIF TOP DK<.......> Value between 0 to +15
Synch Threshold<.......> Value between 0 to +40

Options
Options-1
Power Up
Standby
Last state
TV Open Mode
Source
1st TV
Last Tv
First APS <.......>.  If “Yes” selected, first time TV opens by asking APS.
APS Volume <.......> Value between 0 to +63
Burn In Mode <.......>.  If “Yes” selected, TV opens with Burn-In mode. This mode is used in manufacturing.

APS Test
Auto store <.......>.  If “Yes” selected, Channel is automatically stored.
Unicode Enabled <.......>.  If “Yes” selected, Unicode characters can be read in the USB Files.

Options-2
Source List menu <.......>.  If “Yes” selected, Sorce List Menu appears on the screen when press “source” button.
RS232 for B2B <.......>.  If “Yes” selected, Remote Control commandsthe TV via RS232 and vice versa.
RC Select <.......>
RC Group 1
RC Group 2
RC Group 3
RC Group 4
RC Group 5
RC Group 6

Double Digit Key <.......>.  If “Yes” selected, Double Digit Button on RC activates.
Protection <.......>.  If “Yes” selected, short circuit protection activates.
Led Type <.......>
1 Led 1 Color
1 Led 2 Color
2 Led 2 Color
1 Led 3 Color
2 Led 3 Color

200 Programme <.......>.  If “Yes” selected, totally 200 programmers can be used.
Touchpad <.......>.  If “Yes” selected, Touchpad can be used.

Teletext Options
TXT Darkness <.......> Value between 0 to +63
TXT Type <.......>
Fasttext&Toptext
No
Default
Fastext
Toptext
TXT Language <.......>
Menu
West
East
Cyrillic
Turk/Gre
Arabic
Persian
Auto

No Txt Warning <.......>.  If “Yes” selected, “No Txt Transmission” warning appears on the screen when pressing txt button from RC.
Txt Subtitle <.......>.  If “Yes” selected, Teletext subtitles can be seen.

Optional Features
Default Zoom <.......>
Menu
16:9
4:3
Panaromic
14:9 Zoom
Menu Timeout <.......>
Menu
15 Sec
30 Sec
60 Sec
No Time

Backlight <.......>.  If “Yes” selected, “Backlight” feature is active.
100 Step Slider <.......>.  If “Yes” selected, 64 step sliders will become 100 step sliders.
Analog USB Enabled <.......>.  If “Yes” selected, “Analog USB” option is active.
Menu Double Size <.......>.  If “Yes” selected, menu sizes increases.
CEC Enable <.......>.  If “Yes” selected, “CEC” feature is active.
Digital USB Hotplug <.......>.  If “Yes” selected, “Digital USB Hotplug” feature is active.

PIP Options
Pip <......>
AV PIP
No PIP
PC PIP
Hotel Options <......>
Hotel TV <......>.  If “Yes” selected, “Hotel TV” feature is active.
IR Smartloader <......>.  If “Yes” selected, “IR Smartloader” feature is active.

External Source Settings
TV <.......>
DTV <.......>
Ext 2 <.......>
Ext 2 S <.......>
FAV <.......>
BAV <.......>
S-Video <.......>
HDMI 1 <.......>
HDMI 2 <.......>
HDMI 3 <.......>
HDMI 4 <.......>
YPbPr <.......>
PC <.......>

Preset
User Ad.j
ADC Adj.
Service Adj.
All Adj.
Init Factory Channels.

NVM Edit
NVM-edit addr. (hex)
NVM-edit data (hex)
NVM-data dec

Programming
HDMI DDC Update Mode <.......>
HDCP Key Update Mode <.......>
Software Bypass <.......>.  If “On” selected, speaker effects are bypassed.

LVDS Clock Step <.......> Value between 0 to +255
Memory Clock Step <.......> Value between 0 to +255
DTV Download <.......>.  If “On” selected, DTV software can be updated from SCART.

DSUB9 Download <.......>.  If “On” selected, DTV software can be updated from DSUB9.

Diagnostic
Eeprom I2C
Tuner I2C
IF I2C
HDMI I2C
DTV RS232

KESALAHAN GARIS KE PLASMA TV

<a target="_blank" href="http://www.qbonk.com/?reg=srm-srvce74"/> 
<img src = "http://www.qbonk.com/banner/728.gif" title="belajar komputer" alt="belajar komputer" border="1" align="left" /></a>

SampleKompilasi4.flv